LEGO GBC Shooter Module 3D Building Instructions

4.85

Detailed 3D building instructions of the LEGO GBC Shooter Module
Including:
– 3D building instructions
– html building instructions
– pdf building instructions
– read me file
– and more

Difficulty level: Easy – Medium – Hard

Description


Review Geek.com

This GBC is particularly special. It uses a brilliant design and has the added bonus of being featured in a high quality, well produced video. The popularity of all too many Lego projects is held back by poor video work. That’s not the case here — PV-Productions did an incredible job this time around, setting a new bar for GBCs and GBC videos.

The new GBC 5 uses six discrete modules. Modules are simple machines (like an Archimedes screw) that work together to create the entire circuit. The more modules, the more complex the GBC. Module design is quite varied from one builder to another, but the point is that they would theoretically be able to work together, even though the standards for GBC modules seems to be quite loose.

The creation used about 2500 Lego pieces and two motors, a Lego XL and one for the 9V pneumatic pump. The controlls are provided through Lego’s NXT 1.0, which also handles the counting of the balls as they work their way through the circuit.

The GBC modules don’t all have formal names, but he was nice enough to describe the mechanisms for us (you can see them all in the gallery):

  • Push: Pushes balls from the left and right side to the middle track.
  • Accelerator: Shoots balls to the other side.
  • Splitter: Makes balls go left and right in pairs. Two balls go left and then two balls go right.
  • Stop-go #1: Stops balls and lets them go by at the right time.
  • Stop-go #2: Same function, in another position.
  • Stop-go #3: Same function, in a third position.
  • Shoot: Shoots balls using a normal Lego spring.
  • Cardan gear: Moves trolley back and forth.
  • Tilt trolley: Dumps balls to another track.
  • Pneumatic scissor lift: Adjusts height.
  • Pneumatic switch: Controls air flow.

So yes, it’s a very complex device, but it does its job extremely well. The usages of simple machines — like the Cardan gear, which converts circular motion into linear motion — might seem simple in concept, but as you can see in the gallery images, the implementation of these concepts is much more complex. And then designing a machine from scratch that uses all these mechanisms is certainly the most impressive part of the GBC. Even for the advanced adult fan of Lego (AFOL) the GBC is a huge challenge and time-consuming undertaking.

 

 

Detailed 3D building instructions of the LEGO GBC Shooter Module are available. The package also includes pdf-file building instructions and more.

To open the building instructions LDD-file you need to download and install LEGO Digital Designer. For the building instructions PDF-file no extra special software is needed.

NOTE: You may not reupload the building instructions!

 

 

Newsarticle video

 

 

Reviews

There are no reviews yet.

Be the first to review “LEGO GBC Shooter Module 3D Building Instructions”