Ever wanted to go the extra mile with your creations, literally? With the non stackable powered up connector you can only connect a limited amount of devices the the LEGO Powered Up hubs.
To open up your creativity to think bigger and getting rid of all these annoying boundaries we have created an easy to use and very robust Powered Up Splitter Cable. Connect multiple LEGO Powered Up Motors and lights (no sensors) to one output from the hub and control them with ease.

Plug & Play

We have developed a compact and robust Powered up Splitter Cable (size of a 2×4 brick) which is 100% compatible with all the LEGO Powered Up devices like motors, lights and sensors. Use our Powered Up Splitter Cable with any LEGO Boost, LEGO WeDo, LEGO Spike, LEGO Control+ and all the other Powered Up systems. No electronics knowledge is needed and installation is as easy as connecting the power connector to the compatible LEGO power system. Simple and reliable.

Copy or Invert?

There are 2 types available: Copy and Invert. This affects the behavior of the B port of the Powered Up Splitter Cable.
The primary A port will always keep the original behavior intact and you can see the A port as a short Powered Up Extension Cable.

Copy (default): This type is most often used as it will allow more motors/lights to connect to a single Powered Up port on your hub and copy the behavior. The B port on the Powered Up Splitter Cable will copy the exact behavior of what is connected to the A port of the Powered Up Splitter Cable.
This gives a similar behavior to what is probably familiar when using the LEGO Power Functions system and stacking Power Functions connector plugs on top of each other.

Invert: The B port on the Powered Up Splitter Cable will invert the behavior of what is connected to the A port of the Powered Up Splitter Cable. This can be useful in train setups when there are 2 Powered Up train motors inside one LEGO train engine in opposite direction. You can now physically rotate the LEGO Powered Up train motor 180 degree so that the cable is on the other side which makes building the train engine easier and allows for different, more complex, designs. If you have other use cases for them we would love to hear them from you!

Customization options

Although we already offer many electronic products, there may always be something specific you need for your project. We like to listen carefully and are always open for suggestions from the LEGO community. That means you! Get in touch with us to describe your needs and we can make a custom product for you. This can be a variation on an existing product from us or something completely new. If it is a popular request we may eventually turn it into an official product.

Get in touch with us

Preview

Rebuild your LEGO sets ...

Explore the wonderful world of Great Ball Contraptions and start engineering with our building instructions (Preview) right away! Get many more build and play hours from the LEGO set you already have! All our models are so called Alternate Builds, which are models entirely made from parts of an existing LEGO set. This makes it really easy to get yourself started today with the greatest feat of LEGO engineering there is. But it is so much more than that.

Learn more on our building instructions

The Powered Up Splitter Cable all over the world